Solar designed and installed by your local NETCC-approved team
Home and business battery storage, with rebates and finance sorted for you
Licensed electrical work across the Hunter
Areas we service Newcastle · Lake Macquarie · Hunter
Solar designed and installed by your local NETCC-approved team
Home and business battery storage, with rebates and finance sorted for you
Licensed electrical work across the Hunter
A faulty or underperforming solar system is money going out the window every day it stays broken. Our licensed, CEC-accredited team repairs and services any brand across Newcastle and the Hunter, whether we installed it or not, and gets your panels earning their keep again.
Your solar panels should be cutting your energy bills, not sitting idle. When a system faults or quietly underperforms, every sunny day it stays that way is savings you’ve already paid for going to waste. We keep systems earning, with repairs, servicing and health checks across Newcastle, Lake Macquarie, Maitland and the Hunter.
A drop in output isn’t always the panels. It can be a failing inverter, a tripping DC isolator, degraded rooftop wiring or a loose connection at the switchboard, the sort of work a cleaning-only or handyman operator can’t safely do. As licensed electricians and CEC-accredited solar installers, we diagnose the whole system and fix the root cause, at height and to standard. If it turns out to be a switchboard or isolator issue, the same team handles that too.
Your power bill is climbing again despite having solar on the roof.
A fault light, an error code, or a blank screen on your solar inverter.
Your app or monitoring is showing reduced generation, or nothing at all.
Cracked panels, discoloured cells, water ingress, or birds and debris under the array.
An isolator that keeps tripping, a burning smell or scorched wiring, a safety issue.
Something feels off but you can’t pin it down. A health check will find it.
A burning smell, scorched wiring or an isolator that keeps tripping is a safety issue. Switch off at the main switch and book a licensed electrician before doing anything else. The good news: most faults are fixable, and a repair is usually far cheaper than replacing the whole system.
We diagnose the entire system: panels, inverter, wiring, isolators and monitoring, not just the panels. Done properly, that means finding the root cause, not just the symptom.
The hardest-working part of your system and the most common failure point. We diagnose error codes, no output, overheating and end-of-life units, repairing where it makes sense, and matching or upgrading you to a compatible unit where it doesn’t.
Cracked or damaged panels, faulty DC isolators (a known fire-risk item in NSW), degraded rooftop wiring and water ingress at connections, licensed electrical work carried out safely at height, from the roof to the switchboard.
If your system is switched on but producing less than it should, we review your monitoring data alongside a physical inspection to find where the output is being lost, then restore your panels toward peak performance.
A health check is the low-commitment way to find out exactly how your system is performing, ideal if you’ve moved into a home with existing solar, or you suspect your panels aren’t pulling their weight.
We inspect the whole system: panels, inverter, wiring, isolators and monitoring, to find the root cause, not just the symptom.
You get a clear, upfront price and scope before any work starts.
We fix the fault: a component-level repair where it stacks up, or a like-for-like replacement or upgrade where it doesn’t.
We confirm the system is generating as it should and that every connection is safe and sound.
You get your system back at full output, with a plain-English rundown of what we found and did.
Solar is a long-term investment, and periodic servicing protects both the hardware and your manufacturer and workmanship warranties. Where a one-off repair fixes a specific fault, regular maintenance catches the small ones: a loose connection, early panel degradation, a struggling inverter, before they get expensive. Getting on a roof to clean panels is licensed, at-height work, not a garden-hose job, so we handle it as part of routine maintenance.
You don’t have to track down the company that installed your system. Plenty have closed down or stopped answering the phone. We service systems we didn’t install and we’re familiar with the common inverter brands on Newcastle roofs. Because we’re CEC-accredited, licensed electricians, you get full-service solar and electrical under one roof.
If your system is switched on but you can’t explain the drop in output, a health check pinpoints where the generation is being lost, so you can protect your energy savings before they slip away.
Faulty DC isolators are a known fire-risk item on NSW rooftops, and a burning smell, scorched wiring or an isolator that keeps tripping is never something to wait on. If you notice any of these, switch your system off at the main switch and call a licensed electrician before doing anything else.
This is licensed electrical work carried out at height. We fault-find the full run from the roof to the switchboard, so the fix addresses the cause, not just the symptom that showed up on your app.
There’s a point where repairing an ageing system stops making sense. If your inverter is near end of life and your panels are well behind modern output, a system upgrade, or adding a battery to store your daytime solar, can be the better spend. We’ll tell you honestly which way to go.
Not sure where your system sits? Compare current system sizes, look at a battery retrofit, or explore your options on our solar page.
Licensed, any-brand, local, and honest about what your system actually needs. That’s how we approach every job, whether it’s a fault to fix or a setup you just want checked.
Licensed electricians and accredited solar installers, not a cleaning-only or handyman operator. A solar fault is often an electrical fault.
If your fault turns out to be an isolator or switchboard issue, the same team handles it, no juggling two trades.
We service systems we didn’t install, including where the original company has closed or stopped answering the phone.
We’ll tell you plainly whether a repair, an upgrade or a battery is the smarter spend, backed by a proper diagnosis.
Talk to a licensed local electrician, no obligation, straight answers.
It depends on the fault. An isolator repair, a panel replacement and an inverter swap are very different jobs at very different price points. We diagnose the fault first, often through a health check, then give you a clear quote before any work starts.
Yes. We repair and service any brand, from any installer. It’s a common situation when the original company has closed or won’t return calls, and it’s no problem for us.
We operate during business hours rather than as a 24/7 emergency service. If you notice a burning smell, smoke or sparks, treat it as an emergency and call 000. For a tripping isolator or a fault that can wait, switch the system off at the main switch and contact us, and we’ll book you in promptly.
As a general guide, panels benefit from a periodic check and clean as local conditions require, which helps protect your warranty and your output. We can advise a sensible cadence for your site and conditions.
Weigh up the age of your setup, the condition of the inverter and current output against a modern one. If repairs are stacking up on ageing gear, an upgrade, or adding battery storage, may be the smarter investment. We’ll give you an honest read either way.
Newcastle and the inner suburbs, Lake Macquarie, Maitland, and the wider Hunter Valley including Cessnock, handled quickly, during business hours, by a local team.
Obligation-free quotes across Newcastle, Lake Macquarie & the Hunter.
